Publications

Google Scholar

L. Zhou*, T. Huynh, S. Park, H. Hyer, A. Mehta, S. Song, Y. Bai, B. McWilliams, K. Cho, Y. Sohn, “Additive manufacturing of Al-10Ce alloy by laser powder bed fusion”, Journal of Materials Science, 55, 14611–14625, 2020.

H. Hyer, L. Zhou, S. Park, G. Gottsfritz, G. Benson, B. Tolentino, B. McWilliams, K. Cho, Y. Sohn, “Understanding the laser powder bed fusion of AlSi10Mg alloy”, Metallography, Microstructure, and Analysis, 9, 484–502, 2020.

A. Mehta, L. Zhou, D.D. Keiser, Y. Sohn, “Anomalous growth of Al8Mo3 phase during interdiffusion and reaction between Al and Mo”, Journal of Nuclear Materials, 539, 152337, 2020.

L. Zhou*, H. Hyer, S. Thapliyal, R.S. Mishra, B. McWilliams, K. Cho, Y. Sohn, “Process-dependent composition, microstructure, and printability of Al-Zn-Mg and Al-Zn-Mg-Sc-Zr alloys manufactured by laser powder bed fusion”, Metallurgical and Materials Transactions A, 51, 3215–3227, 2020.

S. Thapliyal, M. Komarasamy, S. Shukla, L. Zhou, H. Hyer, S. Park, Y. Sohn, R.S. Mishra, “An integrated computational materials engineering-anchored closed-loop method for alloy design for additive manufacturing”, Materialia, 9, 100574, 2020.

H. Hyer, L. Zhou*, G. Benson, B. McWilliams, K. Cho, Y. Sohn, “Additive manufacturing of dense WE43 Mg alloy by laser powder bed fusion”, Additive Manufacturing, 33, 101123, 2020.

K.H. Arachchilage, M. Haghshenas, S. Park, L. Zhou, B. McWilliams, K. Cho, Y. Sohn, R. Kumar, “Numerical simulation of high-pressure gas atomization of two-phase flow: Effect of gas pressure on droplet size distribution”, Advanced Powder Technology, 30 (11), 2726-2732, 2019.

L. Zhou*, H. Hyer, S. Park, Y. Sohn, K.P. Rice, Y. Chen, “Investigation of microstructure and dispersoids/precipitates in additively manufactured aluminum alloys”, Microscopy and Microanalysis,25 (S2), 328-329, 2019.

L. Zhou*, H. Hyer, H. Pan, Y. Bai, K. Rice, Y. Sohn, “Microstructure and mechanical properties of modified AA5083 manufactured by laser powder bed fusion”, Additive Manufacturing, Vol.28, pp.485-496, 2019.

L. Zhou*, A. Mehta, B. McWilliams, K. Cho, Y. Sohn, “Microstructure, precipitates and mechanical properties of powder bed fused Inconel 718 before and after heat treatment”, Journal of Materials Science & Technology, Vol.35, pp.1153-1164, 2019.

G. Jalilvand, O. Ahmed, L. Spinella, L. Zhou, T. Jiang, “The effective control of Cu through-silicon via extrusion for three-dimensional integrated circuits by a metallic cap layer”, Scripta Materialia, 164, 101-104, 2019.

C. Zhang, Z. He, H. Chen, L. Zhou, G. Tan, S.T. Wu, Y. Dong, “Light diffusing, down-converting perovskite-on-polymer microspheres”, Journal of Materials Chemistry C, 7, 6527-6533, 2019.

A. Mehta, N. Eriksson, R. Newell, L. Zhou, E. Schulz, W. Sprowes, F. Betancor, Y. Park, D.D. Keiser, Y. Sohn, “Phase transformations and microstructural development in the U-10 wt pct Mo alloy with varying Zr contents after heat treatments relevant to the monolithic fuel plate fabrication process”, Metallurgical and Materials Transactions A, 50 (1), 72-96, 2019.

L. Zhou*, H. Pan, H. Hyer, S. Park, Y. Bai, B. McWilliams, K. Cho, Y. Sohn, “Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion”, Scripta Materialia, 158, 24-28, 2019.

L. Zhou*, A. Mehta, E. Schulz, K. Cho, Y. Sohn, “Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment”, Materials Characterization, 143, 5-17, 2018.

S. Koul, L. Zhou, Y. Sohn, A. Kushima, “Microstructure and mechanical behavior of the 3D printed Inconel 718: In-situ TEM study”, Microscopy and Microanalysis, 24 (S1), 1942-1943, 2018.

C. Hofmeister, L. Zhou, F. Kellogg, A. Giri, K. Cho, Y. Sohn, “Effects of degassing on the microstructure, chemistry, and estimated mechanical properties of a cryomilled Al-Mg alloy”, Metallurgical and Materials Transactions A, 49, 1-14, 2018.

A. Mehta, L. Zhou, E. Schulz, D.D. Keiser, J.I. Cole, Y. Sohn, “Microstructural characterization of AA6061 versus AA6061 HIP bonded cladding–cladding interface”, Journal of Phase Equilibria and Diffusion, 39 (2), 246-254, 2018.

H. Yun, E. Eslami, L. Zhou, “Noncontact stress measurement from bare UHPC surface using Raman piezospectroscopy”, Journal of Raman Spectroscopy, 49, 1540-1551, 2018.

Z. Li, W. Niu, L. Zhou, Y. Yang, “Phosphorus and aluminum codoped porous NiO nanosheets as highly efficient electrocatalysts for overall water splitting”, ACS Energy Letters, 3 (4), 892-898, 2018.

W. Niu, K. Marcus, L. Zhou, Z. Li, L. Shi, K. Liang, Y. Yang, “Enhancing electron transfer and electrocatalytic activity on crystalline carbon-conjugated g-C3N4”, ACS Catalysis, 8 (3), 1926-1931, 2018.

K. Liang, K. Marcus, Z. Yang, L. Zhou, H. Pan, Y. Bai, Y. Du, M.H. Engelhard, Y. Yang, “Freestanding NiFe oxyfluoride holey film with ultrahigh volumetric capacitance for flexible asymmetric supercapacitors”, Small, 14 (3), 1702295, 2018.

L. Guo, Z. Yang, K. Marcus, Z. Li, B. Luo, L. Zhou, X. Wang, Y. Du, Y. Yang, “MoS2/TiO2 heterostructures as nonmetal plasmonic photocatalysts for highly efficient hydrogen evolution”, Energy & Environmental Science, 11 (1), 106-114, 2018.

W. Niu, Z. Li, K. Marcus, L. Zhou, Y. Li, R. Ye, K. Liang, Y. Yang, “Surface-modified porous carbon nitride composites as highly efficient electrocatalyst for Zn-Air batteries”, Advanced Energy Materials, 8 (1), 1701642, 2018.

L. Zhou*, A. Mehta, K. Cho, Y. Sohn, “Composition-dependent interdiffusion coefficient, reduced elastic modulus and hardness in γ-, γ′-and β-phases in the Ni-Al system”, Journal of Alloys and Compounds, 727, 153-162, 2017.

K. Liang, L. Guo, K. Marcus, S. Zhang, Z. Yang, D.E. Perea, L. Zhou, Y. Du, Y. Yang, “Overall water splitting with room-temperature synthesized NiFe oxyfluoride nanoporous films”, ACS Catalysis, 7 (12), 8406-8412, 2017.

K. Liang, K. Marcus, S. Zhang, L. Zhou, Y. Li, S.T. De Oliveira, N. Orlovskaya, Y. Sohn, Y. Yang, “NiS2/FeS holey film as freestanding electrode for high-performance lithium battery”, Advanced Energy Materials, 7 (22), 1701309, 2017.

A.D. Moghadam, E. Omrani, H. Lopez, L. Zhou, Y. Sohn, P.K. Rohatgi, “Strengthening in hybrid alumina-titanium diboride aluminum matrix composites synthesized by ultrasonic assisted reactive mechanical mixing”, Materials Science and Engineering A, 702, 312-321, 2017.

L. Zhou*, A. Giri, K. Cho, Y. Sohn, “Microstructural and crystallographic characteristics of modulated martensite, non-modulated martensite, and pre-martensitic tweed austenite in Ni-Mn-Ga alloys”, Acta Materialia, 134, 93-103, 2017.

L. Guo, Z. Li, K. Marcus, S. Navarro, K. Liang, L. Zhou, P.D. Mani, S.J. Florczyk, K.R. Coffey, N. Orlovskaya, Y. Sohn, Y. Yang, “Periodically patterned Au-TiO2 heterostructures for photoelectrochemical sensor”, ACS sensors, 2 (5), 621-625, 2017.

K. Liang, Y. Yan, L. Guo, K. Marcus, Z. Li, L. Zhou, Y. Li, R. Ye, N. Orlovskaya, Y. Sohn, Y. Yang, “Strained W(SexS1-x)2 nanoporous films for high efficient hydrogen evolution”, ACS Energy Letters, 2, 1315–1320, 2017.

K. Liang, K. Marcus, L. Guo, Z. Li, L. Zhou, Y. Li, S.T. De Oliveira, N. Orlovskaya, Y. Sohn, Y. Yang, “A freestanding NiSx porous film as a binder-free electrode for Mg-ion batteries”, Chemical Communications, 53 (54), 7608-7611, 2017.

L. Guo, K. Liang, K. Marcus, Z. Li, L. Zhou, P.D. Mani, H. Chen, N. Orlovskaya, Y. Sohn, Y. Yang, “Enhanced photoelectrocatalytic reduction of oxygen using Au@TiO2 plasmonic film”, ACS Applied Materials & Interfaces, 8 (51), 34970–34977, 2016.

L. Zhou, A. Giri, K. Cho, Y. Sohn, “Mechanical anomaly observed in Ni-Mn-Ga alloys by nanoindentation”, Acta Materialia, 118, 54-63, 2016.

M. Nezafati, A. Giri, C. Hofmeister, K. Cho, M. Schneider, L. Zhou, Y. Sohn, C. Kim “Atomistic study on the interaction of nitrogen and Mg lattice and the nitride formation in nanocrystalline Mg alloys synthesized using cryomilling process”, Acta Materialia, 115, 295-307, 2016.

S. Behdad, L. Zhou, H.B Henderson, M.V. Manuel, Y. Sohn, A. Agarwa, B. Boesl, “Improvement of aging kinetics and precipitate size refinement in Mg-Sn alloys by hafnium additions”, Materials Science and Engineering A, 651, 854-858, 2016.

L. Zhou, A. Giri, K. Cho, Y. Sohn. “A combinatorial study for interdiffusion, crystallography and mechanical behavior of Ni-Mn-Ga alloys”, Defect & Diffusion Forum, 371, 153-159, 2016.

C. Kammerer, S. Behdad, L. Zhou, M. Gonzalez, B. Boesl, Y. Sohn, “Diffusion kinetics, mechanical properties, and crystallographic characterization of intermetallic compounds in the Mg–Zn binary system”, Intermetallics, 67, 145-155, 2015.

L. Zhou, C. Kammerer, A. Giri, K. Cho, Y. Sohn, “Microstructural development and ternary interdiffusion in Ni-Mn-Ga alloys”, Metallurgical and Materials Transactions A, 46(12), 5572-5587, 2015.

L Zhou, A.Mehta, A. Giri, K.Cho, Y. Sohn, “Martensitic transformation and mechanical properties of Ni49+xMn36-xIn15 (x=0, 0.5, 1.0, 1.5 and 2) alloys”, Materials Science and Engineering A, 646, 57-65, 2015.

M.V. McLeod, A.K. Giri, C.L. Dennis, L. Zhou, S.C. Vogel, O. Gourdon, H.M. Reiche, K. Cho, Y. Sohn, R.D. Shull, B.S. Majumdar, “Magnetocaloric response of non-stoichiometric Ni2MnGa alloys and the influence of texture”, Acta Materialia, 97, 245-256, 2015.

L. Zhou, F. Kellogg, C. Hofmeister, A. Giri, K. Cho, Y. Sohn, “Nanostructured tungsten through cryogenic attrition”, International Journal of Refractory Metal and Hard Materials, 52, 70-77, 2015.

L. Zhou, S. Mukherjee, K. Huang, Y.W. Park, Y. Sohn, “Failure characteristics and mechanisms of EB-PVD TBCs with Pt-modified NiAl bond coats”, Materials Science and Engineering A, 637, 98-106, 2015.

C.C. Kammerer, M. Fu, Le Zhou, Dennis D. Keiser, Y. Sohn, “Interdiffusion and reaction between pure magnesium and aluminum alloy 6061”, Defect and Diffusion Forum, 364, 174-181, 2015.

L. Zhou, A. Giri, K. Cho, H. Heinrich, Y.Sohn, “Microstructural and crystallographic characterization of Ni2+xMn1−xGa Alloys (x = 0.14, 0.16, 0.19, 0.22, and 0.24) by transmission electron microscopy”, Metallurgical and Materials Transactions E, 1(3), 239-246, 2014.

K. Huang, Y. Park, L. Zhou, K.R. Coffey, Y. Sohn, B.H. Sencer, J.R. Kennedy, “Effects of Cr and Ni on interdiffusion and reaction between U and Fe-Cr-Ni alloys”, Journal of Nuclear Materials, 451 (1-3), pp.372–378, 2014.

J. Dickson, L. Zhou, A. PazyPuente, M. Fu, D.D. Keiser, Y. Sohn, “Interdiffusion and reaction between Zr and Al alloys from 425° to 625°C”, Intermetallics, 49, 154-162, 2014.

O. Ahmed, L. Zhou, N. Mohajeri, Y. Sohn, “Corrosion behavior of AISI 304 stainless steel with solar salt heat transfer fluid”, Advanced Materials Research, 922, 13-17, 2013.

L. Zhou, S. Mukherjee, Y. Sohn, “Degradation of (Ni,Pt)Al coatings by mixture of sodium and potassium sulfate at 950°C”, Advanced Ceramic Coatings and Materials for Extreme Environments II: Ceramic Engineering and Science Proceedings, 67-76, 2012.

Z. Bai, L. Zhou, T.Liang, H. Guo, S. Gong, “Hot‐corrosion behavior of thermal barrier coated DZ125 superalloy exposed to atomized seawater and kerosene”, International Journal of Modern Physics B, 24 (15-16), 3155-3160, 2010.

J. Wu, H. Guo, L. Zhou, L. Wang, S. Gong, “Microstructure and thermal properties of plasma sprayed nanostructure YSZ thermal barrier coatings”, Journal of Thermal Spray Technology, 19 (6), 1186-1194, 2010